[PLOG] Lord Azoth´s Dark elves Painting Log [finished]
Moderators: Layne, xFallenx, cultofkhaine
Forum rules
Remember that picture file size should be no larger than 256KB.
For the full Painting and Modelling rules, visit [url]http://www.druchii.net/phpBB3/viewtopic.php?f=9&t=27440[/url]
Remember that picture file size should be no larger than 256KB.
For the full Painting and Modelling rules, visit [url]http://www.druchii.net/phpBB3/viewtopic.php?f=9&t=27440[/url]
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
[PLOG] Lord Azoth´s Dark elves Painting Log [finished]
Hi all, this is what I´m doing right now... a 20 warriors unit..so I´m too lazy I made a "filler" for this unit. It´s equivalent to 6 warriors 4x6 cm ...
They are warrior from Gamezone, an Spanish company. I dont´t like them a lot, but GW´s ones look worse to me...
the photos show the base colour, last night I dipped them (don´t know how to say it really in English, I used a mix os matt varnish + asphalt -> this was the translation I found for betun de judea)...
hope you like it
The filler:
the filler comes from West wind miniatures, from a blsiter of its "bad" elves
The unit:
http://img509.imageshack.us/img509/948/deguerrerosnz4.jpg
Incredibly wide image edited into link by Gnosis.
They are warrior from Gamezone, an Spanish company. I dont´t like them a lot, but GW´s ones look worse to me...
the photos show the base colour, last night I dipped them (don´t know how to say it really in English, I used a mix os matt varnish + asphalt -> this was the translation I found for betun de judea)...
hope you like it
The filler:
the filler comes from West wind miniatures, from a blsiter of its "bad" elves
The unit:
http://img509.imageshack.us/img509/948/deguerrerosnz4.jpg
Incredibly wide image edited into link by Gnosis.
Last edited by Lord_azoth on Thu Nov 19, 2009 1:12 pm, edited 3 times in total.
Death before dishonor
- Ke'hl'ash silinrul
- Noble
- Posts: 437
- Joined: Fri May 28, 2004 11:27 am
- Location: Malmö, Sweden
- Contact:
Great looking minis IMO. They look like GWs but still slightly better. Like a mix of Warriors and Executioners.
Unit filler and Champion and Standard Bearer are my favorites.
I like the paint scheme too. You really mixed it evenly with the black, red and metal.
You wrote that it is WIP so I don´t know what you are planing to do more. But the red need more deep. I believe that a simple wash with dark ink would do wonders.
You need to repaint the movement tray. Don´t leave it green.
Bases are nice looking but I would give them a dark ink wash too.
All in all a really good looking Warrior unit.
Unit filler and Champion and Standard Bearer are my favorites.
I like the paint scheme too. You really mixed it evenly with the black, red and metal.
You wrote that it is WIP so I don´t know what you are planing to do more. But the red need more deep. I believe that a simple wash with dark ink would do wonders.
You need to repaint the movement tray. Don´t leave it green.
Bases are nice looking but I would give them a dark ink wash too.
All in all a really good looking Warrior unit.
I am Ke'hl'ash Silinrul, Bounty Hunter!!!
Beware of the shadows!!!
Beware of the shadows!!!
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
Mounted Sorcerer
I´ve left the warriors for a while ...
I´ve decided to make a mounted sorcerer, but for all steeds mounted one..dark steed, pegasus, dragon etc..
For this, I´ll drill her out instead gluing her so I can change the mount freely
These minis are also from spanish company, GameZone...
This is the horse/pegasus, I elongated a bit the legs and drill a good pin (steel bar) to hold the horse in differente bases (25x50mm for horse, 40x40mm for pegasus)
rear view, you can se the holes to introduce the sorcerer pinning
last view for the horse, I elongated the neck also..gamezone minis (specially horses, look totally cool to me..but setting them is hard..very hard..
pinned sorcerer
sorcerer and mount, joined through the holed pin...
I know the wings can be a problem playing, but if the problem appears, I´ll use only the base temporarily...
1) horse base, 25x50mm, must retouch it
mounted in the "running" base:
2) monster/pegasus base, 40x40mm..
mounted in the "flying" base:
I cant bear her strange and bald head!! ... so modelled a little hair base...I´ll make details with GS
horse/pegaus with holes filled
I´ve decided to make a mounted sorcerer, but for all steeds mounted one..dark steed, pegasus, dragon etc..
For this, I´ll drill her out instead gluing her so I can change the mount freely
These minis are also from spanish company, GameZone...
This is the horse/pegasus, I elongated a bit the legs and drill a good pin (steel bar) to hold the horse in differente bases (25x50mm for horse, 40x40mm for pegasus)
rear view, you can se the holes to introduce the sorcerer pinning
last view for the horse, I elongated the neck also..gamezone minis (specially horses, look totally cool to me..but setting them is hard..very hard..
pinned sorcerer
sorcerer and mount, joined through the holed pin...
I know the wings can be a problem playing, but if the problem appears, I´ll use only the base temporarily...
1) horse base, 25x50mm, must retouch it
mounted in the "running" base:
2) monster/pegasus base, 40x40mm..
mounted in the "flying" base:
I cant bear her strange and bald head!! ... so modelled a little hair base...I´ll make details with GS
horse/pegaus with holes filled
Death before dishonor
-
- Slave (off the Altar)
- Posts: 13
- Joined: Sun Aug 17, 2008 7:43 pm
- Layne
- Arnold Layne
- Posts: 3398
- Joined: Mon Nov 12, 2007 1:44 am
- Location: On Her Majesty Morathi's Secret Service
They look great and all, but I worry that they're going to outshine considerably any and all Black Gaurd you might wish to include. In fact, I think they should be your Black Gaurd. Seriously, they're going to stand alongside Malekith's Finest and say, "what, couldn't afford cool armour?"
Layne
Global Moderator. Everything but the weather.
Caveat Numptor.
Karonath - WS6 / S4 / T4 / D5 / I3
Equipment: Bloodfeather, heavy armour, helm, Sea Dragon Cloak, rope x 2, month rations x 2
Inventory: longspear, 2 short swords, glaive, winter gear, shade cloak,
Mount: Dark Steed (Shiny), talisman of kurnous
Gold: 2294
Skills: Ambidexterity, Controlled Frenzy, Basic Ride, Drukh Kaganth
Class: Khainite
Global Moderator. Everything but the weather.
Caveat Numptor.
Karonath - WS6 / S4 / T4 / D5 / I3
Equipment: Bloodfeather, heavy armour, helm, Sea Dragon Cloak, rope x 2, month rations x 2
Inventory: longspear, 2 short swords, glaive, winter gear, shade cloak,
Mount: Dark Steed (Shiny), talisman of kurnous
Gold: 2294
Skills: Ambidexterity, Controlled Frenzy, Basic Ride, Drukh Kaganth
Class: Khainite
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
sorcerer and mount finished:
with GS have detailed the long hair, I´ll try to do small pointy ears... If can´t this will be the final step of her.
The mount has all stuff sanded down and fitted.. I´ve made some addings to the mane with GS to compensate the lengthen of the neck
chariot...
I mixed the GW chariot and the CO of Gamezone (hate the old fat scaly cows from GW) the main problem was fixing both in a natural way to avoid a forced conversion
the green spots in the CO are a mix of GS and glue to fill gaps and make the CO solid (didn´t want to pin everything) ... Ill have to sand them down and do a little cutting...
This will be the base for the chariot, a thin layer of a chip stuff, after drying it will be sanded, carved to make the flagstones as the rest of units
the riders will be the GW ones.
My idea is that the chariot will be composed of 3 parts:
base+CO
chariot
riders
joined with pins, easier to transport, also if I make a heroe on foot, Ill pin him and will be able to use him on foot or on chariot...
more on monday
with GS have detailed the long hair, I´ll try to do small pointy ears... If can´t this will be the final step of her.
The mount has all stuff sanded down and fitted.. I´ve made some addings to the mane with GS to compensate the lengthen of the neck
chariot...
I mixed the GW chariot and the CO of Gamezone (hate the old fat scaly cows from GW) the main problem was fixing both in a natural way to avoid a forced conversion
the green spots in the CO are a mix of GS and glue to fill gaps and make the CO solid (didn´t want to pin everything) ... Ill have to sand them down and do a little cutting...
This will be the base for the chariot, a thin layer of a chip stuff, after drying it will be sanded, carved to make the flagstones as the rest of units
the riders will be the GW ones.
My idea is that the chariot will be composed of 3 parts:
base+CO
chariot
riders
joined with pins, easier to transport, also if I make a heroe on foot, Ill pin him and will be able to use him on foot or on chariot...
more on monday
Death before dishonor
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
Chariot finished
this weekend has been less proctive than I would wanted..but at the end the chariot is finished
Chariot
I´ll make a little explanation about how I make bases, the example will be the cariot one
1) I draw a grid in the base I showed in the last post, and with a small saw for cutting metal cut the main lines
2) I use the showed tool to make craves and marks
3) I cut some flagstones, make some carves and holes etc. with the tools showed. I stop When I´m satisfied with the overall look
after this I glue some sand to cover holes and make the ruinous look
As I said the chariot will be set by pieces:
1) riders and spears:
see the pins
2) Chariot, you can see the pins to join the CO
3) CO + base
assembled Chariot:
detail of the join between chariot and CO
Today I´ll spray the sorcerer, steed, bases and all the pieces of the chariot... Let´s paint
Chariot
I´ll make a little explanation about how I make bases, the example will be the cariot one
1) I draw a grid in the base I showed in the last post, and with a small saw for cutting metal cut the main lines
2) I use the showed tool to make craves and marks
3) I cut some flagstones, make some carves and holes etc. with the tools showed. I stop When I´m satisfied with the overall look
after this I glue some sand to cover holes and make the ruinous look
As I said the chariot will be set by pieces:
1) riders and spears:
see the pins
2) Chariot, you can see the pins to join the CO
3) CO + base
assembled Chariot:
detail of the join between chariot and CO
Today I´ll spray the sorcerer, steed, bases and all the pieces of the chariot... Let´s paint
Death before dishonor
- [llct]kain
- Assassin
- Posts: 587
- Joined: Tue Sep 27, 2005 7:54 am
- Location: Speyer (ex Heidelberg)
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
[LLCT]Kain wrote:What is the material you put on the base before cutting the grid. Is it plaster ?
it´s a bicomponent putty from a local store (a stroe which suplies molds materials etc.). http://www.feroca.com/ (Spain)
It´s like milliput but less subtle. You can mix it with GS or use it alone (like in bases). Unlike GS, this one can be sanded, and cut in angular ways better.
Death before dishonor
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
painting chariot
Painting stage has started... now I´ll be doing more slowly, I´m too slow painting
the colour scheme is very basic:
red : Foundation one
gold: shining gold + a bit of turquoise + a bit of burnt brown
turquoise (vallejo one) for details (this will be the color for CO)
other metallics, boltgun, chainmail + a bit of purple
the photos are not exactly showing the colours (they have been autoadjusted by the photoshop in colour), and the turquoise looks more like blue, is greener)
One step of the chariot before being finished:
The chariot finished, totally basecoated ready to apply the mix of varnish and asphalt as the warriors:
Today I´ll start with the raiders....
the colour scheme is very basic:
red : Foundation one
gold: shining gold + a bit of turquoise + a bit of burnt brown
turquoise (vallejo one) for details (this will be the color for CO)
other metallics, boltgun, chainmail + a bit of purple
the photos are not exactly showing the colours (they have been autoadjusted by the photoshop in colour), and the turquoise looks more like blue, is greener)
One step of the chariot before being finished:
The chariot finished, totally basecoated ready to apply the mix of varnish and asphalt as the warriors:
Today I´ll start with the raiders....
Death before dishonor
I love what you did with the tiles. that already looks cool unpainted. if I hadn't based my whole army already, i'd steal that idea. well, maybe I will for the next bigger model i do, we'll see. well done mate
Malekith and Morathi meet Jerry Springer: read the complete saga here
http://www.druchii.net/viewtopic.php?t=37639
My Gallery: http://photobucket.com/albums/a18/senna ... warhammer/
http://www.druchii.net/viewtopic.php?t=37639
My Gallery: http://photobucket.com/albums/a18/senna ... warhammer/
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
CO + base finished
Finally chariot finished!!!
Fist some photos about the process...
bone things (or things I´ve suppoused were bone)-> bleached bone (GW) + engish uniform (vallejo)
scales: vallejo turquoise, the rest have been used previously..
CO + base ended:
Fist some photos about the process...
bone things (or things I´ve suppoused were bone)-> bleached bone (GW) + engish uniform (vallejo)
scales: vallejo turquoise, the rest have been used previously..
CO + base ended:
Death before dishonor
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
chariot assembled
The chariot totally assembled, tonight it will be washed with the asphalt mix...
Death before dishonor
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
Lord Azoth´s Dark elves Painting Log: chariot "asphalte
Chariot "asphalted", maybe a little dark..but think is ok until highlights...
raider 1, the photo is horrible:
raider 2:
Chariot:
CO + base :
Chariot assembled:
tonight I hope to start the sorcerer
raider 1, the photo is horrible:
raider 2:
Chariot:
CO + base :
Chariot assembled:
tonight I hope to start the sorcerer
Death before dishonor
- John silver
- Slave (off the Altar)
- Posts: 23
- Joined: Wed May 14, 2008 8:10 am
- Location: Omsk, Russia
- Contact:
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
John Silver: Tomorrow I´m on holidays so I´ll explain all with a bit more detail when I come back mate..
Thanks all for your comments..
Last update for september, as I said tomorrow I´ll leave for a while..really need holidays ..
Sorcerer painted, as usual base colour to be "asphalted" later...
wanted to try another skin colour scheme
When I come back..going for pegasus!!!
Thanks all for your comments..
Last update for september, as I said tomorrow I´ll leave for a while..really need holidays ..
Sorcerer painted, as usual base colour to be "asphalted" later...
wanted to try another skin colour scheme
When I come back..going for pegasus!!!
Death before dishonor
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
Hi agian after holidays!.. Im back with this little dark pointy ears..
As I said I´m more confortable setting up than painting, so I´ve left the pegasus by now and starting to set one unit of GZ dark riders....and it has been like hell...
I enlarged necks and legs to avoid them to look like ponies, and the alloy is so bad than pinning was horrible.
As you canb see in the photos some hooves have disappeared because when I tried to drill legs to insert the thick pin to the base the leg literally shredded... ARGGHH!!
So now I must fill all the gaps and redo hooves in some horses
Here are the raiders, they dont have any conversion, only a big pin to insert them in the horses, initially I think they wont be glued...maybe easier transport but we´ll see
As I said I´m more confortable setting up than painting, so I´ve left the pegasus by now and starting to set one unit of GZ dark riders....and it has been like hell...
I enlarged necks and legs to avoid them to look like ponies, and the alloy is so bad than pinning was horrible.
As you canb see in the photos some hooves have disappeared because when I tried to drill legs to insert the thick pin to the base the leg literally shredded... ARGGHH!!
So now I must fill all the gaps and redo hooves in some horses
Here are the raiders, they dont have any conversion, only a big pin to insert them in the horses, initially I think they wont be glued...maybe easier transport but we´ll see
Death before dishonor
- Lord_azoth
- Highborn
- Posts: 743
- Joined: Mon Aug 11, 2008 12:57 pm
Jonh Silver wrote:Hello, you do the great job!
Please can you write more about base painting?
What colour and techniques you use?
Thanks.
about the base, It´s explained posts above.
Putty carved + foundation paint (deheneb stone I think) and a mix of matt varnish + asphalt
Minis: This is an army to play, so I want to paint it as fast as I can. I´m only giving then base colour (colours are described above) and applying the same mix of matt varnish and asphalt...
After this I´ll apply highlights etc.
Death before dishonor